Manx SA7x Installationsanleitung PDF herunterladen (Seite 25)

5. Go to the front of the cabinet. Install washer (90–06637–00) and shoulder screw (12–

24007–02) into the front center hole of the guide rail plate assembly and through hole 9

of the cabinet upright. Refer to Figure 3–6.

6. Go to the back of the cabinet. Install three washers (90–06637–00) and three shoulder

screws (12–24007–02) into the following rear holes of the guide rail plate assembly:

• Hole 3 (hole below standoff)

• Hole 9

• Hole 16

This secures the guide rail plate assembly to the cabinet for further hardware installation.

Refer to Figure 3–6.

Installing the SA70–CK Kit 3–11

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Keine Kommentare

Manx SA7x Installationsanleitung Seite 25