Manx SA7x Installationsanleitung PDF herunterladen (Seite 176)

6.3 Powering Up the Magazine Tape Subsystem

6.3.1 Updating the System Conﬁguration Sheet

Now that the subsystem has been successfully installed, power has been

applied, and the drives have passed POST, you are ready to update the system

conﬁguration sheet.

Refer to the KFMSA Module Installation and User Manual (EK–KFMSA–IM)

for complete details on how to ﬁll out a system conﬁguration sheet.

6.4 Labeling the DSSI Cables and Magazine Tape Subsystem

For a single-host conﬁguration, use the following colored labels on the SF72

OCP door, magazine tape subsystem front panel, and all DSSI cables.

Label Colors Connections

Blue Port 1, TF1

Red Port 2, TF2

Yellow Port 3, TF3

Green Port 4, TF4

For a dual-host conﬁguration, use the following colored labels on the SF72 OCP

door, magazine tape subsystem front panel, and all DSSI cables.

Label Colors Connections

Blue Port 1, TF1, port 7

Red Port 2, TF2, port 8

Yellow Port 3, TF3, port 9

Green Port 4, TF4, port 10

6.4.1 Filling Out the Labels

Follow the steps on the inside cover of the SF Family Label Booklet (part

number 36–32882–01) to ﬁll out the labels for the DSSI cables and SF72

operator control panels.

Proceed once you have ﬁlled the cable and OCP labels.

6–24 Installing the Magazine Tape Subsystem in an Sx300 Storage Array

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 319 320

Keine Kommentare

Manx SA7x Installationsanleitung Seite 176