Manx SA7x Installationsanleitung PDF herunterladen (Seite 24)

1.2 DECArray300 Speciﬁcations

Table 1–6 DECArray300 Cabinet System Electrical Speciﬁcations

Voltage 120 Vac 240 Vac

Voltage range nominal 100–120 Vac 220–240 Vac

Input Voltage functional range 86–132 Vac 174–264 Vac

Inrush Current 235 A 150 A

AC–Plug type NEMA L5–30P P/N 12–14379–03

Power Controller 874 887–D

Circuit Breaker 30 A 16 A

Rated Current: 24 A 12 A

Typical Current:

Tx8xx 1.73 A 0.9 A

Sx7x 2.22 A 1.5 A

Rx9x 3.6 A 1.8 A

Power Factor 0.6 0.6

Typical current at nominal voltage. In order to calculate the typical current

of the Sx300 storage array, add the typical current of the storage elements.

The maximum current of the storage array can be up to 20 percent higher

compared with the nominal current.

The ride-through time is > 20 ms. That means that a voltage drop below the

minimum functional voltage range up to 20 ms will not have any impact on the

functionality of the array.

Note

A time lag fuse for the main voltage must be used to avoid the inrush

current blowing the fuse.

Table 1–7 and 1–8 list the recommended environmental operating ranges and

recommended environmental limits for the DECArray300 cabinet system.

1–8 General Information

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 319 320

Keine Kommentare

Manx SA7x Installationsanleitung Seite 24